Products
List of painting hoses
Air Hose
To be recommended use Electric Conducted Air hoses for both of the Air Spray and Electric Static Spray Gun.
- Conductive Air Hose(SEH)
- UB-easy
Actual workingpressure (MPa) 0.5〜0.6
The table slides sideways
| Paint Hose | ||||
|---|---|---|---|---|
| Paint Type | Typical Spray Gun | Actual working pressure(MPa) | Tube & Hose | |
| Manual Spray Gun | Under Body Coat | Air Less Gun | 15～25 | Airless Hose |
| Stone Guard Coat | Air-Airless Gun | 7～8 | Airless Hose | |
| Primer Coat | ES Gun | 0.4～0.5 | FA Tube FA Plus-easy Tube |
|
| Surface Coat | ES Gun | 0.4～0.5 | FA Tube FA Plus-easy Tube |
|
| To Coat / Base & Clear | ES Gun | 0.4～0.5 | FA Tube FA Plus-easy Tube |
|
| Robot Auto machine | Under Body Coat | Rust-Proof high viscosity paint Airless gun |
15～25 | Airless Hose |
| Stone Guard Coat | A-A Gun | 7～8 | Airless Hose | |
| Primer Coat | Air Spray Gun E/S Spray Gun |
0.2～0.3 | PB-easy Hose FUB-easy Hose |
|
| Primer Coat | HVLP Gun | 0.2～0.6 | PB-easy Hose FUB-easy Hose |
|
※表は横にスライドします
| Comparison data of manual spray hose | |||||
|---|---|---|---|---|---|
| Description (unit) | For solvent paints | For water paints | Test method | ||
| PB-easy Hose | FUB-easy Hose | ||||
| Hose size (mm) | 6.5×10 | 7×10 | |||
| Immersion test <Immersion solvents: solvent thinner> |
+26%（△） | +35%（△） | Togawa method: The hose (25mm) is soaked in an immersion solvent for 20 days and the fluctuation of weight is measured. |
||
| Amount of deflection (mm) | 54（◯） | 41（◯） | Togawa method: A load weight of 100g is applied to the edge of a 150mm tube, and the amount of deflection is measured. |
||
| Checking of water paint appropriateness A water paint base is filled in the hose, which is left for 20 days |
Condition of paint |
The paint is somewhat sticky(△) |
The paint is watery(◎) |
After leaving the hose for 20 days, the degree of removability by natural force is compared. |
|
| Condition of inner hose |
A few residual paints(△) | No residual paints(◯) | After removing the residual paints, a water thinner (2 cc) is poured for two times, and the inner part is checked. |
||