Rubber-like touch of highly elastic resin.
The fluids can be visually checked easily.
Note: Cannot be used for fuel oil
Nominal designation | Inner diameter(mm) | Outer diameter(mm) | Regular size(m) | Maximum working pressure MPa at 20℃ | Minimum bending radius(mm) | Regular size weight(kg) |
SB-4 | 4.0 | 9.0 | 100 | 1.5 | 16 | 7 |
SB-6 | 6.0 | 11.0 | 100 | 1.5 | 24 | 9 |
SB-8 | 8.0 | 13.5 | 100 | 1.5 | 32 | 12 |
SB-9 | 9.0 | 15.0 | 100 | 1.5 | 36 | 15 |
SB-10 | 10.0 | 16.0 | 100 | 1.2 | 40 | 16 |
SB-12 | 12.0 | 18.0 | 100 | 1.2 | 48 | 18 |
SB-15 | 15.0 | 22.0 | 100 | 1.0 | 60 | 26 |
SB-19 | 19.0 | 26.0 | 50 | 1.0 | 76 | 16 |
SB-22 | 22.0 | 29.0 | 50 | 1.0 | 88 | 18 |
SB-25 | 25.0 | 33.0 | 50 | 1.0 | 100 | 23 |
SB-32 | 32.0 | 41.0 | 50 | 0.7 | 128 | 33 |
SB-38 | 38.0 | 48.0 | 50 | 0.6 | 152 | 43 |
SB-50 | 50.0 | 62.0 | 40 | 0.6 | 200 | 55 |
SB-63 | 63.0 | 80.0 | 20 | 0.4 | 252 | 52 |
SB-75 | 75.0 | 92.0 | 20 | 0.3 | 300 | 60 |
SB-90 | 90.0 | 108.0 | 20 | 0.3 | 450 | 73.8 |
SB-100 | 100.0 | 118.0 | 20 | 0.3 | 500 | 77.8 |
* The white lines are available only for the products in which inner diameter is between 12 and 75, and are not applied for the products in which inner diameter is between 6 and 10, 90 and 100.