Togawa Industry Corporation

painting hose

A wide variety of products are prepared in this series to support manual spray, spray robot and automatic spray machines. Each product in this series has following features: swelling property is improved; inner roughness is ultimately studied to shorten the setup time; and a ground connection is added for removing the static electricity.

FA Tube

FA Tube

Compared to conventional fluorine tube, the softness and smoothness of inner tube have been improved, attaining superior workability.

Inner fluorine resin product

Use
For piping of paints, solvents, and paint robots, and conveyance of foods and beverages.
Features
Compared to conventional fluorine tubes, the retention power against burst pressure after bending the tube has been greatly upgraded.
Fluids
Paints Solvents Various foods

Specifications: Working temperature limit: Between -20℃ and + 60℃

Nominal designation Inner diameter (mm) Outer diameter (mm) Regular size (m) Maximum working pressure
MPa at20℃
Burst pressure MPa at 20℃
FA-6 4 6 100 1.2 7.8
FA-8 6 8 100 1.2 5.8
FA-10 8 10 100 1.2 5.2

FA Tube

An FA tube appropriate for paint robots! FA tube has a laminated structure in which fluorine resin is used for the inner layer and polyamide resin for the outer layer. The significant superiority of inner roughness for the fluorine resin will help shortening the setup time for color change. Compared to conventional fluorine tubes, the polyamide resin for the outer layer is superior in softness, workability, and break resistance, and helps shortening the setup time for robots, and reduces downtimes.

Sun Paint Tube (P)

Sun Paint Tube (P)

Superior in flexibility by using solvent resistant urethane resin for the outer layer. This tube is designed to improve the workability of painting processes.

Polyamide/Polyurethane resin product

Use
Piping for paints and solvents
Features
Reduces the load of workers.
Fluids
Paints Solvents

Specifications: Working temperature limit: Between -20℃ and + 60℃

Nominal designation Inner diameter (mm) Outer diameter (mm) Regular size (m) Maximum working pressure
MPa at20℃
Burst pressure MPa at 20℃ Minimum bending radius (mm) Regular size weight (kg)
P-7 7 10.0 100 0.5 2.3 45 5.1

Sun Paint Tube (P)

Sun Paint Hose (PB-easy)

Sun Paint Hose (PB-easy)

With the use of polyamide resin, the solvent resistance is significantly improved compared to conventional painting hoses.

Polyamide/Polyurethane resin product

【Features】 A versatile painting hose is now available! As a conductive sleeve is applied around the outer layer, the grounding can be completed just by tightening the metallic joint (when the resistance value is “9 x 106 W” or less, and the whole length is 15m or less).

Use
For piping of paints and solvents
Features
Superior in flexibility and pressure resistance, this hose will
Fluids
Paints Solvents

Specifications: Working temperature limit: Between -20℃ and + 60℃

Nominal designation Inner diameter (mm) Outer diameter (mm) Regular size (m) Maximum working pressure
MPa at20℃
Burst pressure MPa at 20℃ Minimum bending radius (mm) Regular size weight (kg)
PB-easy-7 6.5 10 100 1.5 7.2 35 5.7

Sun Paint Hose (PB-easy)

Sun Paint Hose (PB-with a ground wire)

Sun Paint Hose (PB-with a ground wire)

With the use of polyamide resin, the solvent resistance is significantly improved compared to conventional painting hoses.

Polyamide/Polyurethane resin product

Use
For piping of paints and solvents
Features
Superior in flexibility and pressure resistance, this hose will improve the workability.
Fluids
Paints Solvents

Specifications: Working temperature limit: Between -20℃ and + 60℃

Nominal designation Inner diameter (mm) Outer diameter (mm) Regular size (m) Maximum working pressure
MPa at20℃
Minimum bending radius (mm) Regular size weight (kg)
PB-7 6.5 10 100 1.5 35 5.7

Sun Paint Hose (PB-with a ground wire)

Sun Paint Hose (FUB-easy)

Sun Paint Hose (FUB-easy)

With the use of special resin for the outer layer, this hose is superior in significant flexibility. The fluorine resin, used for the wetted layer, will also demonstrate the significant resistance to water paints.

Inner fluorine resin product

【Features】 Best choice of manual paint hose!
As the inner fluorine resin is superior in inner roughness, this hose will help to shorten the setup time for color change.

Use
For piping of paints and solvents
Features
The fluorine resin, used for the wetted layer, will demonstrate the significant resistance to water paints in addition to oil paints.
Fluids
Paints

Specifications: Working temperature limit: Between -20℃ and + 60℃

Nominal designation Inner diameter (mm) Outer diameter (mm) Regular size (m) Maximum working pressure
MPa at20℃
Burst pressure MPa at 20℃ Minimum bending radius (mm) Regular size weight (kg)
FUB-easy-7 7 10 100 1.5 6 33 5.5

Sun Paint Hose (FUB-easy)

Conductive Air Hose (SEH)

Conductive Air Hose (SEH)

A conductive material is used for inner layer and the grounding can be completed just by connecting a metallic joint.

Polyurethane product

Use
For antistatic piping of painting
Features
Stripping off the ground wire is not necessary, which improves the workability. A reliable grounding can be achieved.
Fluids
Air

Specifications: Working temperature limit: Between -20℃ and + 60℃

Nominal designation Inner diameter (mm) Outer diameter (mm) Regular size (m) Maximum working pressure
MPa at20℃
Burst pressure MPa at 20℃ Minimum bending radius (mm) Weight (kg/m) Regular size weight (kg)
SEH-6 6.5 10 100 1.5 7 35 0.057 5.7
SEH-8 8.5 12.5 100 1.5 7 45 0.084 8.4

Electric resistance value (Ω)

Nominal designation Length of hose (m) 10m Length of hose (m) 20m
SEH-6 1.0×105 2.0×105
SEH-8 1.0×105 1.5×105

*1. Purpose: The values of electric resistance of conductive air hoses, 6.5 x 1B x 10 and 8.5 x 1B x 12.5 in 10m and 20m, are measured.
*2. Test method: A joint (brass) is attached to the conductive air hoses, SE-H6 and SE-H8, and the electric resistance values between the hoses are measured.

Joints for Painting Hose

Joints for Painting Hose

Joints for Painting Hose

Nominal designation Joint type Screw size Guard spring Conformed hose Material
T05-6510 1/4 SB Female G 1/4 PB-easy 7
PB-7
Fub-easy 7
Liquid contact part:SUS304 
Nut: Brass
(electroless nickel plating)
T05-6510 1/4 SBGS Female G 1/4
T05-6510 3/8 SB Female G 3/8
T05-6510 3/8 SBGS Female G 3/8